 |
Thread-Rolling Screws for use in Metals
- A drilled, punched or cast hole is required to accept screw
- Swageform forms its own threads — tapping each hole is not required
- Higher resistance to strip-out versus tri-lobes / less scrap / higher productivity
- Straighter, faster starting versus tri-lobes
- Fully rounded body results in thread engagement 100% around the hole's circumference
Back to top
|
 |
 |
Thread-Forming Screws for use in Thermoplastics
- A drilled hole, molded hole or plastic boss is required to accept screw
- Excellent performance for standard thermoplastic applications
- 48° thread-form with a spaced thread pitch
- Typically used in softer plastics where higher pull-out strengths are required
Back to top
|
|
 |
Thread-Forming Screws for use in Thermoplastics
- A drilled hole, molded hole or plastic boss is required to accept screw
- Excellent performance for a wide range of thermoplastic applications
- High 30° threadform with a low 60° threadform and a spaced thread pitch
- Typically used in stiffer or brittle thermoplastics, particle board or wood
Back to top
|
|
 |
Thread-Forming Screws for use in ALL Plastics
- A drilled hole, molded hole or plastic boss is required to accept screw
- Outstanding performance in the widest range of plastic applications
- 30° thread-form with a reduced root diameter and a spaced thread pitch
- Typically used in most demanding applications involving stiffer and brittle plastics, minimal boss wall thickness or high pull-out strength requirements.
Back to top
|
|
 |
For use in Thin Sheet Metals
- Self-piercing screw for penetrating metal up to 0.050" without a hole
- Twin lead thread profile provides faster entry
- Torque braking serrations under head provide high resistance to strip-out
Back to top
|
|
 |
- Screws come with washers permanently pre-assembled to the screw
- Eliminate costly double inventory and double parts handling
- Available in a variety of head styles and washer styles
Back to top
|
|
 |
- Spot and projection weld screws and weld pins
- Manufactured from low carbon high quality welding steel
- Can be manufactured to meet specific requirements in quantity
Back to top
|
|
 |
- Self drilling screws for use in Metals
- No hole required — drills the hole, taps the threads & fastens the assembly
- Cold forging yields consistent high strength drill points
- For metal applications ranging in thickness from 20 gauge to 1/2"
- Quicker starting — no walking of point — fastest drill times
- Consistent high quality manufacture — ideal for automatic feeding
- A variety of sizes, head styles, and point lengths available from stock
Back to top
|
|
 |
|
with Maxxalunm™ Point for use in Aluminum
Back to top
No hole required — drills the hole, taps the threads & fastens assembly
Designed for aluminum materials up to 0.218" thick
Patented flute geometry to enhance optimum curl removal
Special hardening process designed specifically for aluminum applications
Consistent high quality manufacture — ideal for automatic feeding
Can also be used in selected plastic, fiber glass, and non-steel applications
Back to top
|
|
 |
for Wood to Steel applications
- No hole required — drills the hole, taps the threads & fastens the assembly
- Designed to drill a clearance hole into wood material, followed by drilling,
tapping and fastening into steel
- For use in wood ranging from 1/4" to 2" thick and steel ranging from
0.110" to 0.250" thick
Back to top
|
|
 |
for use in Metals. Masonry. Asphalt, etc.
- Designed for highway, construction, and surveying applications
- Made from durable steel and zinc plated for corrosion resistance
- Ribbed shaped threads assure an anchorage which will not work loose
- Indent in head ideal for use in aligning surveyor's plumb bob
- Eliminate the use of expensive expansion bolts, plugs or lead anchors
Back to top
|
|
 |
Masonry fastening system
- Designed for use in brick, block, or structural concrete
- Pre-drilling of hole required / precision carbide drill-bit provided
- Con-Kwick taps & fastens directly into brick, block, or structural concrete
- Kwick Drive installation kits and display stands available
- 3/16" and 1/4" diameter sizes available from stock with long life plating
Back to top
|
|
 |
- Special Designs
- Platings
- Head styles / Point styles / Recess styles
- Orders and Inquiries
Back to top
|
|
